Advertisement
3
Connecting to your Dual-Band Range Extender
A
. Using the same computer, open a web browser and
type in the following web address in the web
address bar:
http://192.168.1.240
Once the page loads, enter the following login
information:
Login:
admin
Password:
Click
Login
to continue.
If this page does not load or you need to get back
into the unit, you can reset the device by holding
the reset button for 15 seconds, power off/on. If
running Windows, you may also run the setup
software to find the device.
4
Finishing Up
The setup of your HD45X is now complete. A
summary page will appear with all your settings. If
anything is incorrect, click back to re-enter your
settings. Click Finish to complete your setup. The
HD45X will automatically reboot and start repeating
and extending your wireless network.
i
After the reboot, the HD45X will join the original network
and will no longer be listed as "Hawking_HD45X_Extender". It
will automatically be renamed to your original network, unless it
was specified during the set up process. If you wish to modify
this name, please refer to the user's manual.
LED Description
Power
- LED is on, when the power adapter is connected and
plugged into an outlet
Wireless
- LED is on, (blinking) when wireless data activity is
detected. 2.4G is 2.4GHz wireless, 5G is 5GHz wireless
Wired
- LED is on, when a ethernet cable is plugged into the ethernet port
Top # corresponds to 10/100M connections, bottom is for 1000M connections
Technical Support
Tel: 1.888.202.3344
B
. Click 'Scan' to find your wireless Internet
connection. Select a network you would like to
extend, 2.4GHz or 5GHz , and click 'Connect'.
i
The 2.4GHz networks will appear in blue and 5GHz
networks will appear in orange. While you can select a
1234
2.4GHz network, if available we recommend connecting to a
5GHz network to optimize your speed and throughput.
If the signal strength is low or your network does
not appear, you may need to adjust the location of
your HD45X. Click 'Scan' to try again.
Placing your Dual Band Range Extender in an Optimal Location
E-mail: techsupport@hawkingtech.com
Place the HD45X within the range of your wireless source.
Home Router or AP
Router / HotSpot
Hi-Gain™ Dual Band Wireless N
(wireless source)
Range Extender
HD45X
DO NOT place the HD45X outside the range of your wireless source.
Home Router or AP
Router / HotSpot
(wireless source)
Back Panel Description
Removable Antennas
Removable 3dBi Omni-Directional Antennas
Wireless Radio On / Off Switch
Turns on / off the wireless functions
Reset Switch / WPS
Resets your extender to its default settings / WPS Setup
LAN Ports
Connects your wired network devices and computers to your network
Power (12V / 1.25A)
Power Adapter Plug
© 2012 Hawking Technologies, Inc. All rights reserved. All trademarks herin are the property of their respective owners. Apple, Mac, iPad, and iPhone are registered trademarks of Apple Computer, Inc. No Affiliation implied or expressed.
C
. The Quick Setup will now prompt you to enter a
security key only if the network you are
connecting to is encrypted. Enter the key and
click 'Continue'.
Note: If there is no security on the original
network, this step will automatically be skipped.
If you do not know the security key of the
network you are connecting to, please consult
your network administrator.
Home Router or AP
Home Router or AP
Wireless Device
(laptop)
Hi-Gain™ Dual Band Wireless N
Wireless Device
Range Extender
(laptop)
HD45X
www.hawkingtech.com
HD45X- QIG 02012.02.07
Advertisement
