Million Imp. Maintenance - HP Indigo 5000 Preventive Maintenance Manual

2 million imp. maintenance

NOTE:
Date:
HP Indigo press 5000 S/N:
Customer name:
Required parts
ITM drum
PIP drum
IMP drum
Cleaning station
Paper transport
CA294-00570
2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
To be performed together with the monthly routines.
rev 01
Time spent:
Service person:
Country/State:
Complete CE kit. See page 12.
Check the bias carbon brush on the rear wall, and
replace, if required.
Check the ITM overheat thermal fuse carbon brushes
on the front wall, and replace, if required.
Make sure that the housing did not come loose from
the press wall.
Note: See "Conditional replacement" on page 12.
Check the grounding brush, and replace, if required.
Check the condition of the SofSub (PIP underlayer).
Replace the gripper clamps.
Check the grippers magnet gap, and adjust as
required.
Replace the sponge roller.
Check the drive belt tension.
Clean all rollers and sensors.
Clean paper path.
Clean Feeder elastic bridge conveyor belts with IPA.
Clean Feeder drawer tray.
Clean paper transport sensors.
Replace exit roller and springs.
page 6 of 18