Bluetooth - Royal PT-300 User Manual

BLUETOOTH

Android / iOS
To set up the printer through Royal POS software follow the
next steps:
1. Connect the PT-300 to the hardware. If you are using
an android device, go to Settings/Wireless & Networks/
Bluetooth from the Main menu. If you are using an iOS
device, go to Settings/Bluetooth.
NOTE: If you are not sure of the printer's name, check by
pressing the FUNC button. In the interface information, the
BLUETOOTH NAME and BLUETOOTH PIN are listed, though
you may have to enter the password.
2. Enter to Royal POS software and go to Setup/Peripherals
from the Main menu
Device
3. Add a new kitchen printer and choose BLUETOOTH in the
Port
"Connection type" field.
Speed
4. Make sure the information below appears in the following
fields:
Device
Port
5. When finished, press the "SELF-CHECK" button and the
printer will print a test page.
Device
FIELD
FIELD
FIELD
ROYAL Thermal Printer PT-300
INFO
USB 2"/57mm Thermal Printer
Vendor Gprinter
9600 bps
INFO
USB 2"/57mm Thermal
Bluetooth Printer
(the BLUETOOTH NAME of the
printer)
INFO
Thermal LAN/WIFI Printer 80mm /
3"
9