Emerson Copeland EazyCool ZXxE series Quick Installation Manual

Date of last update: 11-May-15
1. Install the unit according to the application guide line.
2. Prefill the unit with refrigerant and set all valves into the operating position.
3. Set up the unit controller XMC25D for the required application.
The controller XMC25D provides 2 programming levels:

Pr1 with direct access

Pr2 protected with a password (intended for experts)
Explanation LED functionalities:
LED
Quick Installation Guide
ZX*E – C
ONDENSING UNITS
Q I
UICK NSTALLATION
MODE FUNCTION
ON Compressor 1 enabled
Flashing Anti-short cycle delay enabled
ON Condensing Fans enabled
ON bar display
Flashing Programming mode
ON PSI display
Flashing Programming mode
You're browsing the service menu
ON
Flashing In fast access menu
Flashing A new alarm happened
You're browsing the alarm menu
ON
ON An alarm is occurring
ON Digital unloader solenoid on
ON In defrost
ON Evap Fans - Liquid Line Solenoid Valve On
Application Engineering Europe
G
UIDE
Ref: D7.8.5/0112-1014/E
1/2