Zotac Xbox EK71080 User Manual page 17

ZOTAC ZBOX
1. Connecting WiFi antenna modules
Connect WiFi antenna modules to the WiFi antenna connectors.
2. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to the USB 3.0
port on the system rear panel.
3. Connecting to DisplayPort displays
Connect the DisplayPort connectors to the DP ports of the monitor or display.
4. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel and the other
end to a HDMI-compatible display such as an HDTV or monitor.
5. Connecting to a DVI display
Connect one end of a DVI cable to an HDTV or monitor, and the other end to the DVI port on
the system rear panel.
6. Connecting to network devices
Connect one end of a network cable to the LAN port on the system rear panel and the other
End to a hub or switch.
7. Turning on the system
Connect two supplied AC adapters to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
 When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet
to save on power consumption.
16