Advertisement
Blocking (Unblocking) a Transmitter- To block or unblock a user.
Duplicating Memory- Allows user to back up learned transmitter memory into the
provided backup memory module.
6
*
,
PRESS SIMULTANEOUSLY
Note- To duplicate memory, plug memory module
into back up slot and press *,6. Once duplication is
complete, remove the backup memory module and
store in a separate location.
Restoring Memory- To restore memory, simply
place the duplicate memory module from the backup
memory location in the main memory position.
Advanced Functions
Step 1. For advanced functions, press and hold the (*) key
and a number key at the same time to select the
corresponding advanced function. (See table at right for
available functions.) Press the '#' key to exit the function.
Audible Diagnostics
Step 1. Activate Transmitter.
Step 2. Listen for beep.
(LED will be displayed when OFF)
Keypad Sound Alerts
Single Beep- Key Pressed.
Double Beep- Confirmation of an accepted Tx
or valid Add/Block input.
Transmitter location Query
Step 1. Enter a transmitter location number (001-250)
to view location status (See table to the right for possible
status displays).
PROGRAMMING THE STAR250 (CON'T)
bLc
002
2
Block
ENTER LOCATION (1-250)
PRESS
dup
END
~6 SECONDS
023
234
3
4
Block
PRESS
TO
CONFIRM
*
1
Memory location of last transmitter received.
*
2
# of open transmitter locations.
*
3
# of locations occupied.
# of blocked transmitter locations.
4
*
First blocked transmitter location.
*
5
Next blocked location (Repeat to scroll).
5
*
6
Duplicate memory- See Duplicating memory.
Version #
*
7
#
Press to exit functions.
0
*
Audible diagnostics OFF/ON
(LED will be displayed when OFF)
*
If no transmitters are programmed into the STAR250,
then (---) will be displayed.
Double Beep- Transmitter is valid & learned into STAR250
accompanied by transmitter location display.
Slow Beep- Security+ Transmitter (Not learned in STAR250).
Fast Beep- Billion Code Transmitter (Not learned in STAR250).
Long Beep- Blocked transmitter.
No Beep- Transmitter not working.
Triple Beep- Confirmation of Delete.
Long Beep- Blocked Tx, Error, or
Out of Range
Display
Description
OPn
Transmitter location is empty
Occ
Transmitter location is occupied
bLc
Transmitter location is blocked
Out
Transmitter location is out of range
(not between 1 & 250)
3
bLc
OR
END
Un-
bLc
(UNBLOCK)
Main Memory
Module
Backup Memory
Module
*
Beeper
no beep
no beep
no beep
long beep
Advertisement
