NETGEAR ProSafe SSL312 Troubleshooting Manual page 3

5) To list all group or container that has name starting with "SSL"
At the MS-DOS prompt, type "dsquery group –name SSL*" (without quotes)
How to configure the SSL312 to authenticate through the LDAP server
1) Using the commands and examples above, you should be able to verify and confirm that
your LDAP server and users have been configured and added properly
2) Use one of the DSQUERY commands above to find out the LDAP BaseN string that you
will need to configure the SSL312. In the example below, we will list all the users belong
to the "Marketing" Organization Unit in the NETGEAR.LOCAL domain.
At the MS-DOS prompt, type "dsquery user ou=marketing,dc=Netgear,dc=local"
(without quotes)
Copy this string to the LDAP BaseN field on the
SSL312
3) Copy the string listed, to the LDAP BaseN field on the SSL312
4) Click Apply and reboot your SSL312 for changes to take effect. All users login onto this
domain in the future will be authenticated by the LDAP server.