Smart Technologies SMART Board Learner Workbook page 85

SMART Board Interactive Whiteboard Learner Workbook
Mobile and Wireless Device Settings
Establish a link between a mobile device such as a laptop, and your SMART product by
pressing the Mobile and Wireless Device Settings button and checking Start the Mobile
Device Manager. Additional checkboxes allow you to start the Mobile Device Manager at
Windows startup and to receive a prompt before sharing your desktop on the interactive
whiteboard.
: To establish a link, both computers must be connected to the same network. The computer attached
NOTE
to your SMART product must be running SMART Board software version 9.x or later, with the Mobile and
Wireless Device Settings enabled.
The mobile computer (laptop) must be running LinQ™ software. Download LinQ software from
www.smarttech.com/support/software/linq.asp.
About Software and Product Support
Press the About Software and Product Support button to learn more about SMART
Board software, contact SMART's Technical Support group, upgrade your software,
register your interactive whiteboard, perform a diagnostic, or access support, training and
other resources.
81