Delete User Online; Create User Offline; Double Pin - Siemens SI120 Configuration Manual

PIN User
4.2.2

Delete User online

4.2.3

Create User offline

4.3

Double PIN

14
Siemens Building Technologies
Fire Safety & Security Products
1 Keep this temporary PIN code:
You accept this proposed PIN for the moment, but you MUST change it when you log in next
time. You will not be able to perform any other actions before the PIN has been changed.
2 Change to a definitive code:
Enter your desired PIN code and confirm it. This is the definite PIN Code for this user
To create the same PIN Code twice is not possible, Sylcom will deny it with the message „wrong PIN".
TM 23] Deleting a user "Delete Pin" in on line mode will also delete the user ac-
[
count and set the parameter from "End user" user to "unused".
[TM 22] Select a user and change the „End User "parameter from „unused".
The first time you login with the temporary user code at the keypad, you have to
change to a definitive user code
since A8
Chose the PIN option of the two possibilities:
A "Single PIN" user is the usual case adding a new user. During logon proce-
dure only 1 PIN is required.
A "Master PIN of next user" is to add for more security. 2 PINs are needed for
authorization to access the keypad menu.
If a user is defined with single PIN, to change it to double PIN, it is necessary to
delete it before and create it again with double PIN function.
If a user is defined with double PIN, to change it to single PIN, it is necessary to
delete it before and create it again with single PIN function.
Only odd user numbers can be defined as a master PIN. Linked slave PINs have always an even user
number, incremented by 1. Example:
Master PIN: User number 007
Linked Slave PIN: User number 008
1
2
07.2009