Brother MFC-7360DN Quick Setup Manual page 2

2 Remove the packing
material from the
machine
IMPORTANT
DO NOT connect the AC power cord yet.
a
Remove the packing tape from the outside of
the machine and the film covering the scanner
glass.
b
Open the front cover.
c
Remove the Silica Pack from the inside of the
machine.
CAUTION
CAUTION
DO NOT eat the Silica Pack. Please discard.
If ingested seek medical attention immediately.
d
Lift the elastic band off the drum.
2
e
Pull the paper strip to remove the protective
material as shown in the illustration.
f
Take out the drum unit and toner cartridge
assembly.
g
Gently shake it from side to side several times
to distribute the toner evenly inside the
assembly.
h
Put the drum unit and toner cartridge assembly
back in the machine.
i
Close the front cover of the machine.