Operation - RIDGID AC9944 Operator's Manual

OPERATION

USING THE WORK SUPPORT
See Figure 20.
Rest the workpiece on top of the work support to support
the workpiece during cutting operations.
NOTE: More than one work support can be used on an
extension arm at a time when extra support is necessary.
Always lower extension arm support legs when using work
supports.
Rest the workpiece on the work support work stop whenever
you need to make repetitive cuts of the same size.
NOTE: To avoid a greater risk of binding or pinching, do
not use both work support at the same time when using the
work stop feature.
DISTANCE
ADJUSTMENT KNOB
HEIGHT
ADJUSTMENT KNOB
SUPPORT LEG
WORK SUPPORT
EXTENSION ARM
To adjust the work support:
 Loosen the work support height adjustment knob.
 Adjust the work support to the desired position.
 Tighten the work support height adjustment knob.
 Lower extension arm support leg.
To adjust work support distance:
 Loosen the work support distance adjustment knob.
 Slide the work support to the desired position along the
extension arm.
 Tighten the work support distance adjustment knob.
 Lower extension arm support leg.
ADJUST WORK
SUPPORT UP AND DOWN
ADJUST
WORK SUPPORT
IN AND OUT
WORK STOP
15
Fig. 20