Rules For Safe Operation - RIDGID FLIP TOP AC9934 Operator's Manual

RULES FOR SAFE OPERATION

wARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
Safe operation of this accessory requires that you read and
understand this operator's manual, and for the tool with which
this product is intended to be used. Read and understand
all labels affixed to the tool.
READ ALL INSTRUCTIONS
 kNOw YOUR ACCESSORY. Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
 kEEP THE wORk AREA CLEAN. Cluttered work areas
and work benches invite accidents.
 ALwAYS wEAR EYE PROTECTION wITH SIDE
SHIELDS MARkED TO COMPLY wITH ANSI Z87.1.
Everyday eyeglasses have only impact- resistant lenses;
they are not safety glasses. Following this rule will reduce
the risk of serious personal injury.
 THIS IS A wORkPIECE SUPPORT. Do not use for any
other purpose than supporting workpieces not exceeding
a maximum weight of 200 lbs.
 bEFORE MAkING A CUT, bE SURE ALL ADJUST-
MENTS ARE SECURE.
 USE THE wORk SUPPORT IN A DRY, INDOOR PLACE
PROTECTED FROM wET CONDITIONS.
 kEEP wORk AREA wELL LIGHTED.
 wHEN TRANSPORTING THE wORk SUPPORT IN A
VEHICLE, SECURELY TIE IT DOwN to prevent move-
ment and possible damage.
 NEVER PUT THE wORk SUPPORT wHERE THE
OPERATOR IS FORCED TO STAND wITH ANY PART
OF HIS bODY IN LINE wITH THE PATH OF THE SAw
bLADE.
 MAxIMUM wEIGHT PLACED ON wORk SUPPORT
MUST bE 200 POUNDS OR LESS.
 DO NOT USE THE wORk SUPPORT AS A SEAT OR
STAND.
 CHECk TO MAkE SURE wORk SUPPORT DOES
NOT ROCk, SLIDE OR MOVE PRIOR TO USE.
 PUT THE wORk SUPPORT ON A FIRM LEVEL
SURFACE where there is plenty of room to handle and
properly support the workpiece.
 SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
2 - English