RIDGID AC9940 Operator's Manual page 12

ASSEMBLY
TRANSPORTING TOOL
See Figure 15.
When hauling the workstand in a vehicle, securely tie it
n
down to prevent movement and possible damage.
Always get help if you need to lift the workstand. When
n
lifting, hold the workstand close to your body. Bend your
knees so you can lift with your legs, not your back.
WARNING:
To reduce the risk of injury from the miter saw
moving or falling off stand, always check that all
mounting bolts and nuts are securely tightened
before moving stand or using tool.
WARNING:
To avoid serious personal injury when lifting, bend
your knees so you can lift with your legs, not your
back.
CAUTION:
Do not lift by any part of the miter saw that is
attached to the workstand. Failure to do so may
result in possible injury and damage the tool.
MAINTENANCE
See Figures 16 and 17.
Periodically clean the sliding roller tracks as shown
n
below.
Also clean and lubricate the locking handle.
n
Fig. 15
12
KEEP AREA
CLEAN
KEEP AREA
CLEAN AND
LUBRICATED
Fig. 16
Fig. 17