Haier HW60-1081 Service Manual page 10

Service Manual
Model No:HW60-1281S/1081
D Prewash Button
Press the key and the light in the key will illuminate. This function may adds
a prewash program before a normal wash.Please see Programm Guide.
E Delay Time
Press the key to select the desired time when the washing progress completes.
When setting this feature, the indicator lamp on the upper left corner of the key
will illuminate. Time reservation range is from 0.5 to 24 hours. The reserved time
will increase by half an hour at each pressing of the key. When the feature is
set, press Start/Pause key,and the reserve time will be displayed and count
down. At the same time, reservation indicator lamp start blinking and will go off
after the washer enters into normal washing progress.
Note:If proam key is turned after delay time is set and before program starts, the
reservation will be automatically cancelled. When delay feature is activated, the
washing start time is fixed. There will be some different between the delay time
and actual program completion time due to different water inlet time and load
distribution condition during spin-dry process.
F Strong Wash Button
Press the key and the light in the key will illuminate.This function may add the
washing time and spin time and rinse time ,it can be selected when washing
dirty clothes.This feature is unavailable in some programs. Please see Program
G Program Selector
By turning this knob, it is possible to select the desired program.Refer to
Program Guide
H Wash Time Key
Press the key and select the wash time,it adds 5 minitues for each
press.Please see Program Guide.
I Temperture Selection Key
Press the key and LCD will display the selected heating
temperature(--,30,40,50,60,90 C), which is adjustable as needed.
Note: -- means cold water washing and not heat up.
J Rinse Key
Press the key and select the rinse time,it changes for each press.
Please see Program Guide
K Speed Selection Key
Press the key and LCD will display the selected spin-dry revolution
speed(0,400,600,800,1000,1200rpm).which is adjustable as needed. (When
NO Spin-dry feature is selected,the time will decrease correspongingly.)
L Spin Key
Press the key and select the spin time, it change according to the speed. Please see
Program Guide
8
Issue
Rev.