Setting The Speakers; Audio Return Channel; Speaker Settings - Sony HT-IV300 Operating Instructions Manual

Hide thumbs Also See for HT-IV300:

Operating instructions manual (56 pages)

Table Of Contents

Table of Contents

Tip

Depending on the TV, volume number of the unit

appears on the TV screen. The number on the TV

screen may be different from that on the front

panel display of the unit.

One-Touch Play

When you play the equipment with an

HDMI cable, the connected TV is turned on

automatically and the TV's input is

switched to the system.

When you perform One-Touch Play on the

connected equipment, the unit is turned on

automatically, and the function is set to

"HDMI1" or "HDMI2" (depending on the

HDMI input jack in use), and your TV's

input is automatically set to the HDMI

input which the system is connected.

Notes

• The above features may not operate with certain

equipment.

• Depending on the settings of the connected

equipment, the Control for HDMI function may

not work correctly. Refer to the operating

instructions of the equipment.

Audio Return Channel

(ARC)

You can enjoy TV sound via the system by

using just one HDMI cable.

For details, see [Audio Return Channel]

(page 74).

Auto Genre Selector

The Auto Genre Selector function acquires

the program information (EPG

information) for the digital broadcast you

are currently watching to switch the sound

field automatically according to the genre

of the program (only when your TV and

device connected to the HDMI IN

(HDMI 1/HDMI 2) jacks are compatible

with the Auto Genre Selector function).

Check that you have made the following

settings:

– [Control for HDMI] in [HDMI Settings]

is set to [On] (page 53).

– [Auto Genre Selector] in [Audio

Settings] is set to [On] (page 53).

– [Sound Effect] in [Audio Settings] is set

to [Sound Field On] (page 52).

– [Sound Field] is ClearAudio+.

Note

You can set [Sound Field] by pressing

CLEARAUDIO+.