Motorola ic502 User Manual page 74

Alarms.
Call timer.
Sending Call Alerts
Call forwarding.
Setting Your Phone To Direct Talk
Note: Before you and another caller can use Direct Talk, both of your
phones must be set to Direct Talk mode.
To set your phone to Direct Talk:
1.
Press
2.
Select Go To Direct Talk. (Switching to Direct Talk Please
Wait appears.)
After a few seconds, the Direct Talk standby screen appears.
Your channel appears on the first line of the display screen,
your code appears on the second line of the display screen
and DT Ready appears just above the softkeys.
When switching from the network to Direct Talk, the last
channel and code used appear on the standby screen. While
in Direct Talk, your display screen indicates there is no
network signal and Direct Talk is active.
To return to network mode when Direct Talk is active:
1.
From the Direct Talk standby screen, press
2.
Scroll to DT Options and press
3.
Select Exit DirecTalk. (Switching to Network Please Wait
appears.)
After a few seconds, the network standby screen appears.
Code Direct Talk Calls
61 Section 2A: Making and Answering Calls
O
> Walkie-Talkie > Direct Talk.
O
O
.
.