Station Http Proxy Support - HP MSM765zl Reference Manual

station http proxy support

Supported on: MSM710 E-MSM720 MSM760 MSM765zl
station http proxy support
Enables support for client stations that are configured to use a proxy server for HTTP and HTTPS,
without requiring users to reconfigure their systems.
no station http proxy support
Disables support for client stations that are configured to use a proxy server for HTTP and
HTTPS.
station idle detection
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
station Idle detection <interval> <count>
The controller continuously polls authenticated client stations to ensure they are active. If no
response is received and the number of retries is reached, the client station is disconnected.
Parameters
Specify how long to wait between polls.
<interval>
Specify how many polls a client station can fail to reply to before it is
<retries>
disconnected.
Description
This feature enables the controller to detect if two client stations are using the same IP address
but have different MAC addresses. If this occurs, access is terminated for this IP address removing
both stations from the network.
Changing these values may have security implications. A large interval provides a greater
opportunity for a session to be hijacked.
The initial query is always done after the client station has been idle for 60 seconds. If there is no
answer to this query, the settings for Interval and Retries are used to control additional retries.
system accounting
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
system accounting
Enables RADIUS accounting support.
no system accounting
Disables RADIUS accounting support.
remember delay
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
remember delay <number>
Length of time to remember users. Users who return later than this delay interval, are presented
with the login page instead of being re-authenticated.
CLI commands
Access Controller context
2-63