Connection Of Pg/Pc To Plc; Driver Under Windows 95/98/Nt - Siemens SIMATIC S7 Operating Instructions Manual

SIEMENS AG

2.4 Connection of PG/PC to PLC

2.4.1 Driver under Windows 95/98/NT

The PG/PC may be connected to the PLC by means of the following
components:
o CP 5611 PCI-Card
o CP 5511 PCMCIA-Card
o CP 5411 ISA-Card
o MPI-ISA-Card or MPI-ISA on Board (PG 720/740/760, PC RI45,25,FI25)
o COM 1/2 via PC-Adaptor
PC
MPI-ISA
CP5411/5511/5611
PC
COM1/2
Installation and set-up of the required hardware is carried out via the STEP7-
Tool PG/PC interface parameterisation, which is available in the system after
successful installation.
Toolbox for Data Link PGs/PCs to SIMATIC S7
PC-Adaptor
6
PRODAVE S7
S7-300/400/M7/C7
MPI-interface
S7-200
PPI-interface
S7-300/400/M7/C7
MPI-interface