Connection; Connecting With A Phone; Disconnecting From A Phone; Unpairing - Casio 5502 Operation Manual

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, perform the procedure
under "C Pair the watch with a
pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
"C", hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running
on the phone. On the phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (C) button
for about 2.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
G-SHOCK Connected: "Watch
settings"n"Connection time". Next,
select a setting of 3 minutes, 5
minutes, or 10 minutes.
Operation Guide 5502

Disconnecting from a Phone

Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
phone." to

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
Note
If you are unable to re-pair the watch
●
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
B X Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to "C".
C X Push the crown back in.
After disconnection
30 30
After disconnection
30 30
30
Crown

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l
Note
If your previous phone is near the
●
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, use the
procedure below to delete the
previous pairing information from the
watch. Also, unregister the watch
from the phone you will no longer
connect with.
A X Pull out the crown to the second
click.
30
B X Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to "C".
C X Push the crown back in.
Crown
13