5.4
Mounting/Removing the Q Series Module
The following shows procedures for mounting the Q series module
on the Q series large type base unit (AnS series size).
(1) Attaching the Q series large type blank cover
The following shows a procedure for attaching the Q series large
type blank cover (AnS series size) to the Q series module.
Hitch the module fixing part at
the bottom of the Q series large
type blank cover (AnS series
size) to the slit at the bottom of
the Q series module so that the
back faces of the blank cover
and the module can contact.
Push the top of the Q series
large type blank cover (AnS
series size) toward the Q series
module, and hitch the top fixing
hook to the slit at the top of the
Q series module.
End
Back
face
Point
When mounting the Q series module with Q series large type
blank cover (AnS series size) on the Q series large type base
unit (AnS series size), always tighten the module fixing screws
of the Q series large type blank cover (AnS series size).
Q series module
Q series large type
blank cover
(AnS series size)
Module fixing part
Q series large type blank cover
(AnS series size)
Top fixing hook
Q series module
23
(Bottom view)