Mounting And Installation; Handling Precautions - Mitsubishi Electric ANS-Q-LARGE-U User Manual

5. MOUNTING AND INSTALLATION

5.1

Handling Precautions

This section explains handling precautions for the Q series large type
base unit (AnS series size) and Q series large type blank cover (AnS
series size).
(1) Do not disassemble the Q series large type base unit (AnS series
size) since it is precision apparatus.
(2) Always mount the power supply module on the Q series large type
extension base unit (AnS series size) excluding the Q55BLS and
Q55BLS-D.
When the load of a module used is light, the module may operate
without power supply module; however, the operation cannot be
guaranteed because of its instability.
(3) Tighten the module fixing screws and other screws within the
following range.
Module fixing screw (M3
Base cover fixing screw
Bracket fixing screw (M4
End fitting stopper screw (M4
(4) Do not install the extension cable together with the main circuit
(high voltage and high current) line or bring them close to each
other.
Keep a distance of 100mm or more between them.
Location of screw
×
12 screws)
×
8 screws)
×
8 screws)
18
Tightening torque
range
•
0.36 to 0.48N m
•
0.36 to 0.48N m
•
1.00 to 1.35N m
•
1.00 to 1.35N m