Memory Operations; Saving Display Or Data Log; Store Operations (Screen Snapshots); Recalling Stored Data (Screen Snapshots) - GE Druck DPI 610 User Manual

Memory Operations

Saving Display or Data Log

In Store Mode three memory operations can be set-up: None, Snapshot and Data Log.
Refer to Using Setup for details.

Store Operations (Screen Snapshots)

To store any display (menu displays excepted), press the STORE key. This saves the
current display to the next available location. Supporting text (10 characters) may be
appended. Twenty memory locations are available on a cyclic buffer. When all 20 have
been used, store operations overwrite existing locations, starting at Location 1.
FCT.: CONFIG.
MODE ENREG. RAPIDE

Recalling Stored Data (Screen Snapshots)

To recall a previously stored display, press the RECALL key. This recalls the last display
saved. Press the left
respectively. To exit RECALL, press the EXIT key:
RECALL
K415 Issue No. 1
24V OFF
V
STORE
bar
or right cursor keys to recall the previous or next locations
FCT.: CONFIG.
ENREG. ECRAN 2 TEST19
FCT.: CONFIG. 24V OFF
MODE ENREG. RAPIDE
ENREG. RAPIDE 19
VOLTAGE
TEXTE :
SELECTIONNER
24V OFF
EMPLACEMENT
V
bar
30
Store
ENTRER TEXTE
V
bar
EXIT