Add Camera Manually; Configure Camera Settings - Planet NVR-E6480 Quick Installation Manual

64-ch windows-based nvr with 8-bay hard disks

Hide thumbs Also See for NVR-E6480:

Table of Contents

2.7 Add Camera Manually

If you are adding a camera located in another network, use "Add Camera

Manually". Fill in Media Type, Protocol, IP Address, HTTP Port, Account and

Password. Finally, click "Get Device Settings" and then "Apply".

2.8 Configure Camera Settings

1. Go to the Setup page and then the Devices tab. Choose the camera from the

Camera List.

2. Select Basic, Video, PTZ, or B tab to configure related settings.

3. Click "Apply" to save the settings.

Table of Contents