Toshiba RAS-18PKVSG-E Service Manual page 108

No. Part name
Electric part
4
box assembly
Procedures
1) Follow the procedure item 3 .
2) Remove screw holding the electric part cover.
TA sensor
Earth line
TC sensor
Louver motor VT (L) connector
(black)
Louver motor VT (R) connector
(black)
3) Disconnect the connectors for the fan motor
and louver motor from P.C. board assembly.
4) Disconnect the cord motor of Louver VT (5P)
from the Louver VT (L/R) connector.
Earth screw
Earth line
Washer
5) Remove the earth screw and earth line from
evaporator.
6) Pull out TC sensor from sensor holder of the
evaporator.
7) Remove the 2 fixing screws that secures the
electric parts box assembly, unit display
assembly and remove the electric parts box
assembly.
L 1 2
N 3
Fan motor connector
Louver motor connector
TC sensor
Sensor holder
- 107 -
FILE NO. SVM-17001
Remarks
Screw
Electric part cover
Electric parts box
Screw
Screw
Unit display
Connectors