Ricoh Aficio CL3000 Maintenance Manual page 64

Troubleshooting
❖ ❖ ❖ ❖ Print Error Messages ("Error Log" in Configuration Page)
Messages/Second messages
Collate Cancelled
Driver Setting Error (Memo-
ry)
Duplex Cancelled
Exceeded Max. Pages (Col-
late)
5
Exceeded Max. Stored Files
Exceeded Max. Stored Pages
HDD Full
HDD Not Installed
I/O Buffer Overflow
Print Overrun
60
Description
The collate feature has been
cancelled.
There is an error in the down-
loaded font(s).
Duplex printing has been can-
celed.
The maximum number of
pages has been exceeded for
collation.
The maximum number of files
has been exceeded during
Sample Print or Locked Print.
The maximum number of
pages has been exceeded dur-
ing Sample Print or Locked
Print.
The maximum hard disk area
size for form/font has been
exceeded.
An HDD overflow error oc-
curred during Sample Print or
Locked Print.
The Sample Print or Locked
Print feature was tried with-
out the Printer Hard Disk in-
stalled.
The maximum size of the I/O
buffer has been exceeded.
The image data has been
thinned out due to image
compression.
Solution
Install the optional Printer
Hard Disk or increase the
memory capacity to 128MB or
more.
Reset the parameter for down-
loading fonts.
Confirm that the paper used is
supported for duplex print-
ing. Or, increase the memory
capacity.
Install the optional Printer
Hard Disk or increase the
memory capacity to 128MB or
more.
Delete the stored files or re-
duce the file size of them.
Reduce the number of pages
to print.
Delete unused form/font
types.
Delete the stored files or re-
duce the file size of them.
To use the Sample Print or
Locked Print feature, install
the optional Printer Hard
Disk. If the message appears
again, contact your sales or
service representative.
Increase the size of the I/O
buffer.
Increase the memory capacity.