Disassembly; Hinge Cover Removal; Inner Enclosure And Upper Frame Removal; Disassembly 6.1 Hinge Cover Removal - Panasonic SR-TEG10 Service Manual

6. DISASSEMBLY

6.1 Hinge cover removal

1. Remove the dew collector.
2. Remove the hinge cover mounting screws.
3. As show in the figure, insert a narrow flat head screwdriver from just below and pry off the hinge cover.

6.2 Inner enclosure and Upper frame removal

1. As show in the figure, pry up three fastening hooks. Fixing the upper frame, turn the inner enclosure in
the arrow direction.
2. The upper frame will be seperated from the inner enclosure and the upper frame.
Note : When assembling, refer to the illustration without the position relationship between the Inner Enclosure
and the Upper Frame.
- 10 -
SR-TEG10 / SR-TEG18