Channel Menu; Air/Cable - Star Trac StairMaster Owner's Manual

3. CHANNEL MENU

CHANNEL MENU contains 4 sub-menu presets (Air/Cable, Auto Scan, Show/Hide, DTV Signal)
3.1 Air / Cable
Channel
3.2 Auto Scan
Channel
Are you sure ?
No Yes
February, 2016(Version 2)
Air/Cable Cable
Auto Scan
Show/Hide
DTV Signal Good

Air/Cable

Auto Scan
Show/Hide
DTV Signal Bad
AutoScan
Found 0 Progam(s)
ATV 0 Progam(s)
DTV 0 Progam(s)
2 % CH 4
Enter MENU
1. Use VOLUME ▲ ▼ keys to select Channel.
2. Use CHANNEL ▲ ▼ keys to select Air/Cable.
3. Push CC Key to select.(Air or Cable)
Enter MENU
1. Use VOLUME  keys to select Channel.
2. Use CHANNEL  keys to select Auto Scan.
3. Push CC key.
4. Push VOLUME  keys to select Yes.
Broadcasting frequency is automatically searched and
saved. The search starts from analog TV (NTSC) to digital
TV (VSB/QAM) and takes from 4 to 5 minutes. Channel
numbers are allocated for weak signals from analog broad-
casting. In DTV, weak signals or signals without broadcast-
ing are ignored.
Depending on the content provided by the cable or satellite
company, there may be some content received that is inap-
propriate for your intended viewing audience. Once channel
scanning is complete, these channels can be deleted as
necessary by using the keypad.
INPUT SIGNAL LEVEL REQUIREMENTS
Common sources of television signal are cable, satellite or
over-the-air antenna systems. Many of these choices will
provide signal in analog, digital or both even both formats.
In order to provide high-quality images, the signal level
supplied to each screen should be in the range of -70dBm
to -5 dBm when read on analog channels. A signal level
outside of this range will provide less than optimum results.
In order to ensure the highest degree of satisfaction, MYE
Entertainment recommends using a MYE Entertainment
Certified Installer for installation & ongoing maintenance.
P
ERSONAL
6
V S O
IEWING CREEN WNER'S
G
UIDE