Ricoh 3010 Printer Reference page 18

B
Adjust the paper guides to the paper size.
If the paper guides are not flush against the paper, skewing and misfeeds
might occur.
Before loading paper, unlock the paper guides by pushing up the paper guide
release lever.
To lock the paper guides, push down the paper guide release lever. The ma-
chine then selects the bypass tray automatically.
1.
Extender
2.
Paper Guide
3.
Paper guide release lever
C
Gently insert paper facing down into the bypass tray until the beeper
sounds.
Fan the paper to get air between the sheets to avoid a multi-sheet feed.
D
Select the paper size.
Note
❒ Open out the extender to support paper sizes larger than A4 L, 8
❒ When setting an OHP transparency, make sure that its front and back sides
are properly positioned.
Reference
For printer driver settings, see the printer driver Help.
Select paper type when printing onto OHP transparencies or thick paper
(over 127.9 g/m
parencies Using the Control Panel".
10
AJO008S
2
). For details, see p.14 "Setting Thick Paper or OHP Trans-
×11 L.
1
/
2