Voice Gateway Deployment - Cisco VG202 Hardware Installation Manual

Chapter 1 Overview of the Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means by security. Statement
1017
No user-serviceable parts inside. Do not open. Statement 1073
Warning
This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect
Warning
the host to earth ground during normal use. Statement 242
Warning The importance of proper grounding cannot be overemphasized. It will minimize the potential for
damage to your system and maximize safety at the system site. We recommend you consult a licensed
electrician or your local electric utility company if you have any questions. Statement 269
Warning A ground wire must always be a single piece of wire. Never splice two wires together for a ground.
Corrosion and weathering can lead to a poor connection at the splice, making the ground ineffective
and dangerous. Statement 270
Use copper conductors only. Statement 1025
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040

Voice Gateway Deployment

Figure 1-7
Cisco VG204XM voice gateway.
OL-15959-01
shows a typical deployment scenario for a Cisco VG202, Cisco VG202XM, Cisco VG204, or
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide
Voice Gateway Deployment
1-9