Production Configurations
Base Unit Description
This section contains information needed to order and configure a production SSR212PP. The unit is shipped as a
complete, fully integrated, system. The base system includes software. There are different configurations, varying with:
Network Connectivity: iSCSI or Fibre Channel
HDDs: 500GB or 250GB
Controllers: Single or Dual
Each SSR212PP storage system contains the following:
Hardware
•
1 x 2U system chassis (including SATA backplane, system fans, power supply enclosure)
•
1 x Storage Processor Assembly containing the following components:
•
3 (single processor) or 4 (dual processor) 250GB or 500GB SATA II hard disk drives
•
8 (dual processor) or 9 (single processor) disk drive blanks
•
12x Serial ATA hard disk drive cable
•
1x rack mount rail Kit
•
1x Serial communication Cable
•
1x printed Quick Start Guide
•
1x Resource CD
Software
•
Navisphere Express storage management software (installed on unit)
•
Navisphere Express Server initialization software
•
Navisphere Express Storage System initialization software
•
PowerPath* path management software
1 (single processor) or 2 (dual processor) x 300 W power supply module
o
2 (single processor) or 4 (dual processor) x iSCSI or FC Front End (FE) ports
o
1 (single processor) or 2 (dual processor) x Intel® Processor 1.3 GHz
o
1 (single processor) or 2 (dual processor) x 512MB memory module
o
1 x 256MB battery backed cache card (single processor only)
o
3