Table of Contents
Advertisement
10. If you are instructed to return the feature key, follow all packaging instructions,
Installing an optional ServeRAID adapter advanced feature key
To install an optional ServeRAID adapter advanced feature key, complete the
following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see "Removing the left-side cover" on page 181).
4. Rotate the adapter-retention brackets to the open position.
5. Align the upgrade key with the connector on the ServeRAID adapter and push it
238
IBM System x3400 M3 Types 7378 and 7379: Problem Determination and Service Guide
7. Install and lock the left-side cover (see "Installing the left-side cover" on page
181).
8. Lock the left-side cover.
9. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
and use any packaging materials for shipping that are supplied to you.
on page 149.
into the connector until it is firmly seated.
Advertisement
Table of Contents
