Initial Power On Test - Raymarine i70 Installation Instructions Manual

5.1 Initial power on test

Instrument controls
Control layout and functions.
1
Item
1.
2.
3.
4.
36
2 3 4
Description
LEFT SOFT BUTTON Power,
brightness, cancel, back
UP ARROW Up navigation, Adjust Up
DOWN ARROW Down navigation,
Adjust Down
RIGHT SOFT BUTTON Menu, select,
OK, Save
Powering the display on
Turning on the display
1. Press and hold the LEFT SOFT button for one second until the
Raymarine logo appears.
If the unit is being switched on for the first time or after a factory
reset the setup wizard will be launched.
Note: The Raymarine logo is not displayed if the unit is in 'sleep
mode', the unit may appear off but still has power.
Powering the display off
1. From any favorite page press and hold the LEFT SOFT button.
After 1 second a power down pop up will appear.
2. Continue to hold the LEFT SOFT button for a further 3 seconds
to complete the power off
D12065-1
i70 Instrument display Installation instructions