Table of Contents
Advertisement
Fan/heat sink assembly
NOTE:
The fan/heat sink assembly spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an Intel Core processor
For use only on computer models equipped with an Intel Pentium N4200 or Intel Celeron N3350
processor
For use only on computer models equipped with an Intel Pentium M3710 or Intel Celeron N3060
processor
For use only on computer models equipped with an Intel Celeron N3060 processor and eMMC
Before removing the fan/heat sink assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
6.
Remove the system board (see
Remove the fan/heat sink assembly:
1.
Turn the system board upside down with the front toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Loosen the four Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to
the system board.
Keyboard/top cover on page
System board on page
46).
Spare part number
855996-001
903214-001
855997-001
855998-001
32).
Battery on page
39).
Component replacement procedures
53
Advertisement
Table of Contents
