Radius Authentication And Authorization For Telnet Users By A Switch - HP A5830 Series Configuration Manual

Login authentication
Username:test@bbb
Password:
<Switch> ?
User view commands:
display
ping
quit
ssh2
super
telnet
tracert
When switching to user privilege level 3, the Telnet user only needs to enter password enabpass as
prompted.
<Switch> super 3
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
If the HWTACACS server is not available, the Telnet user needs to enter password 654321 as prompted
for local authentication.
<Switch> super 3
Password:
Error: Invalid configuration or no response from the authentication server.
Info: Change authentication mode to local.
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
RADIUS authentication and authorization for Telnet users by a
switch
Network requirements
As shown in
authorization for the Telnet user on port 1645.
Set the shared keys for authentication and authorization packet exchanges between the NAS and the
RADIUS server to abc. Configure the switch to remove the domain name from a username before
sending the username to the RADIUS server.
Display current system information
Ping function
Exit from current command view
Establish a secure shell client connection
Set the current user priority level
Establish one TELNET connection
Trace route function
Enter the password for HWTACACS privilege level switch authentication
Enter the password for local privilege level switch authentication
Figure 22, configure Switch B to act as a RADIUS server to provide authentication and
59