Upgrading Or Replacing Controller Options; Replacing A Battery - HP P600 User Manual

Upgrading or replacing controller options

In this section

Replacing a battery

.......................................................................................................................29
Replacing a battery
1. Close all applications, and then power down the server. This procedure
flushes all data from the cache.
2. Remove the cache module:
a. Open the ejector latches on each side of the DIMM connector (1).
b. Pull the cache module out of the DIMM slot (2).
WARNING: There is a risk of explosion, fire, or personal
injury if the battery pack is not properly handled. Refer to "Battery
replacement notice (on page 58)" before installing or removing any
item that contains a battery pack.
IMPORTANT: Whether you are replacing the main cache battery or the
secondary (lower) cache battery, remove both batteries so that the
board circuitry recognizes the new battery pack.
29