Print Data; Install/Update Software - CEN-TECH 62120 Owner's Manual & Safety Instructions

Print Data

1. Connect the Scan Tool to the computer
with the supplied USB Cable.
From the Main Menu, select
2.
Print Data, then press OK.
Main Menu

Install/Update Software

This function allows you to update
the Scan Tool software and DTC
library through a computer.
Note: The Scan Tool comes with the most
recent software and DTC library versions.
1. On the computer, install
setup.exe driver from the included CD
or download the driver from the internet:
a. Go to www.HarborFreight.com
b. Search for 62120
c. Click Software Update tab
d. Download software
(if there is an update available)
e. Open Update Instructions PDF
f. Follow instructions
Item 62120
For technical questions, please call 1-888-866-5797.
Print Data
Stored Codes
Pending Codes
Live Data
Freeze Frame
I/M Readiness
O2 Sensor Test
Print All Data
Figure CC
3. Follow instructions on the
Scan Tool and the computer.
2. Connect the Scan Tool to the computer
with the supplied USB Cable.
From System Setup, select
3.
Update Mode, then press OK.
System Setup
Language
Configure Monitors
Unit of Measure
Key Beep Set
Status Beep Set
Tool Self-test
Update Mode
Figure CD
4. Follow instructions on the
Scan Tool and the computer.
1/9
?
7/7
?
Page 35