Table of Contents
Advertisement
Tool Self-test
From System Setup, select Tool Self-test, then press OK.
Display Test
1.
From Tool Self-test, select
Display Test, then press OK.
to start test. (Figure 3.9 )
Tool Self-test
Display Test
Keyboard Test
LED Test
Keyboard Test
1.
From Tool Self-test, select
Keyboard Test, then press OK.
Keyboard Test
Press any key to
Double [ESC] to return
LED Test
1.
From Tool Self-test, select
LED Test, then press OK.
RED LED ON
YELLOW LED ON
GREEN LED ON
Page 16
1/3
Figure N
start test
key:
Figure O
LED Test
1/3
Figure P
For technical questions, please call 1-888-866-5797.
2.
To verify that the LCD screen is
functioning properly, a color test will run.
3.
Press ESC to exit the test.
?
2.
Press each button to make sure they
are functioning properly. If functioning
properly, the correct name for each
button will display after the word "key:".
Press ESC twice to exit the test.
3.
2.
To verify that the LEDs are functioning
properly, select each LED then
press OK. If functioning properly,
the selected LED will light up.
3.
Press ESC to exit the test.
Item 62120
Hide quick links:
Advertisement
Table of Contents
