Safety - CEN-TECH 62120 Owner's Manual & Safety Instructions

Important Safety Information
Work Area Safety
1. Keep your work area clean and well lit.
Cluttered benches and dark
areas may cause accidents.
2. Do not connect or disconnect the
Scan Tool while the ignition is
on or the engine is running.
3. DO NOT attempt to operate
the Scan Tool while driving
the vehicle. Have a passenger
operate the Scan Tool.
4. Before testing a vehicle, engage the
parking brake and chock the tires.
5. NEVER smoke or allow a spark or
flame in vicinity of battery or engine.
6. Operate the vehicle in a well ventilated
work area.
Exhaust gases are poisonous.
7. Do not operate the Scan Tool
in explosive atmospheres, such
as in the presence of flammable
liquids, gases, or heavy dust.
8. Keep a fire extinguisher suitable for
gasoline/chemical/electrical fires nearby.
9. Use extreme caution when working
around the ignition coil, distributor
cap, ignition wires and spark plugs.
These components create hazardous
voltages when the engine is running.
Electrical Safety
1. Do not use the Scan Tool
while standing in water.
2. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators.
Item 62120
For technical questions, please call 1-888-866-5797.
10. Keep bystanders, children and visitors
away while operating the Scan Tool.
11. This product is not a toy. Do not allow
children to play with or near this item.
12. Use as intended only.
13. Inspect before every use; do not use
if parts are loose or damaged.
14. Do not place the Scan Tool
on any unstable surface.
15. Handle the Scan Tool with care. If
the Scan Tool is dropped, check for
breakage and any other conditions
that may affect its operation.
16. Keep the Scan Tool dry, clean,
free from oil, water or grease.
Use a mild detergent on a clean
cloth to clean the outside of the
Scan Tool, when necessary.
17. Store the Scan Tool and
accessories in a locked area
out of the reach of children.
18. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
3. Do not expose the Scan Tool to rain or
wet conditions.
Water entering the Scan Tool
increases the risk of electric shock.
4. Make sure your hands are dry
before operating the Scan Tool.
Page 3