NEC Univerge SV9300 Programming Manual page 36

Command Line Example:
CM BA117>00>1 Set + digit addition/deletion dialing
CM BA119>00>NONE
CM BA121>00>NONE
CM BA122>00>NONE
CM BA126>00>0
CM BA135>00>1
SIP Trunk Programming Guide
1. Select SIP Trunk Profile Number assigned by CM35 YYY=091 and
click the Read button to get current data settings.
2. YY=117 Set + digit addition/deletion dialing.
3. YY=119 Only set when using T.38 faxing.
4. YY=121~123 Set desired CODEC list when using programmable list.
(CM BA YY=21)
5. YY=126 Select 0 to receive CID from the username field if the display
name field is blank in the initial invite.
6. YY=135 Select 0 to receive called party number from the 'to header' SIP
invite. Change only if requested, otherwise leave at default.
This setting is not applicable for this carrier test leave at default.

7. Click Apply.
(Default: Not provided
(Default: G.711 Pass-Through Fax. Only set
when using T.38 Fax)
(CODEC List First Priority: G.711)
(CODEC List First Priority: G.729a)
(Receiving Caller ID Reference)
(Called Number Reference Location)
Issue 1.0
27