Table of Contents
Advertisement
Section 2 - Installation
Mounting on a Ceiling
1. Locate an area on the ceiling which is capable of supporting the weight of the camera.
2. Attach the alignment sticker to the ceiling.
3. Drill two pilot holes where the holes of the alignment sticker are located.
4. Insert the supplied plastic anchors into the drilled holes, and align the holes at the base of the camera with the plastic anchors.
5. The camera can be mounted with the cable routed through the ceiling, wall, or from the side.
6. Insert the provided screws through the holes. Use a screwdriver to tighten and secure.
D-Link DCS-6116 User Manual
Hardware Installation
11
Advertisement
Table of Contents
