Operating Positions - Remington 117535-01 Owner's Manual

Hedge wizard electric pole trimmer owner's manual
Table of Contents

Advertisement

Available languages

Available languages

ELECTRIC POLE TRIMMER
OPERATING POLE
TRIMMER
Continued
Locking the Pole Trimmer ON
1. Push the trigger lock button forward to
Position 2 and squeeze the trigger lever
to the ON position. The Pole Trimmer
will start running.
2. While the Pole Trimmer is running, push
the trigger lock button forward again to
Position 3. Hold the button there while
releasing the trigger lever, then release
the lock button. This locks the trigger
lever in the ON position and the Pole
Trimmer will continue running.
3. To turn the Pole Trimmer OFF, squeeze
the trigger lever and release it. The trig-
ger lock button will reset to Position 1,
locking the trigger in the OFF position.
Note: If the Pole Trimmer is locked ON
during use and the Pole Trimmer becomes
disconnected from the power supply, Disen-
gage the lock ON feature before reconnecting
to the power supply.
Trigger Lock
Button Position 3
Figure 11 - LockingTrigger in ON Position
with Trigger Lock Button in Position 3
USING THE POLE TRIMMER
The Pole Trimmer is a dual-purpose tool. It is
designed to trim and shape tall, hard-to-reach
hedges and bushes with its extended reach
and pivoting power head.You can also adjust
the Pole Trimmer to trim and shape smaller
hedges and shrubs near the ground without
having to bend or stoop.
For more information, visit www.desatech.com
®

OPERATING POSITIONS

To use the Pole Trimmer for trimming tall,
hard-to-reach hedges or shrubs, hold the
Pole Trimmer at the positions shown in
Figure 12. Pivot the power head to several
different positions to shape or sculpt shrubs
or hedges.
Figure 12 - Trimming Tall Hedges or
Shrubs
To use the PoleTrimmer for trimming smaller
hedges or shrubs, hold the Pole Trimmer at
the positions shown in Figure 13.
Figure 13 - Trimming Smaller Hedges or
Shrubs
6
To use the Pole Trimmer for trimming the
bottoms and sides of hedges and shrubs, hold
the Pole Trimmer at the positions shown in
Figure 14.
Figure 14 - Trimming Bottoms and Sides
of Hedges and Shrubs
To use the Pole Trimmer for trimming
low-lying foliage or ground cover, hold
the Pole Trimmer at the position shown in
Figure 15.
Figure 15 - Trimming Low Foliage or
Ground Cover
110939

Advertisement

Table of Contents
loading

Table of Contents