Download Print this page

Remington Protect & Shine S-3000i Use & Care Manual

Professional straightener with 3x protection

Advertisement

Quick Links

REMINGTON MONEY BACK OFFER
If within 30 days after you have purchased your
®
Remington
product, you are not satisfied and would like
a refund, take back the product and sales slip indicating
purchase price and date of purchase to the retailer from
®
whom the product was purchased. Remington
will
reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions
concerning the money back guarantee, please call
800-736-4648 in the U.S.
Questions or Comments:
Please call 800-736-4648 in the U.S.
Visit us at www.remington-products.com
This product will bear one or more compliance marks,
Listed by Underwriters Laboratories, Inc.
120-240 VAC 50/60Hz
Remington and Protect & Shine are trademarks of Remington
Products Company, L.L.C.
is a registered trademark of E. I. du Pont de Nemours
Company and is used under license by Remington Products
Company, L.L.C.
© 2003 R.P.C., L.L.C. Job #WPC03-121 11/03 Part No. 15050
Remington Products Company, L.L.C.
60 Main Street
Bridgeport, CT 06604
MADE IN CHINA
IMPORTANT INFORMATION
ADDITIONAL INFORMATION
• Always heat the unit with the locking
Locking Switch
switch in the UNLOCK
position.
To lock the straightener in the closed position for
NEVER heat the unit when the locking
travel or storage, squeeze the plates together and
switch is in the LOCKED
position.
turn the locking switch clockwise. Make sure to
• Hold unit only by the handle; other areas
unlock the appliance before plugging it in the next
get hot when in use.
time. Simply turn the locking switch counter-
clockwise to unlock it.
• DO NOT use an abrasive cleaning fluid
or material to clean the plates, as damage
DUAL VOLTAGE USE
will occur. After the unit has cooled, wipe
the plates with a damp cloth.
This product contains a special electronic circuit.
This circuit automatically adjusts to worldwide
• DO NOT scratch the surface of the plates,
voltage. When traveling overseas, this product
as this will diminish the effectiveness
can be plugged into any voltage outlet without
®
of the non-stick Teflon
plus Ceramic and
your having to adjust the product manually in any
Ionic coating.
way. In some overseas countries, an attachment
plug adapter of the proper configuration for the
• The red indicator light is for power supply
power supply receptacle may be required. DO
indications only - this is not to show when
the unit is ready to use.
NOT USE a voltage converter or extension cord
with this product.
• DO NOT get the unit too close to scalp,
face, ears, neck or skin.
STRAIGHTENING YOUR HAIR
• After use, allow unit to cool completely
Take extra care when using a Professional
before storing.
Straightening iron. It is important to set the
correct temperature for your hair type before
styling to prevent damage to the hair.
• Make sure the locking switch is in the
unlocked
• Select desired temperature setting. Start with
a low setting and gradually increase heat
as needed based on hair type.
• Plug in the unit. The ON indicator will glow
red, and in a few minutes it will be ready for
use.
• Hair should be completely dried before
using a straightening iron.
• To make styling easier, use clips to section
your hair: top, sides, and back.
• Always start from the back of your neck,
continue over the sides and finish with the
front section.
• Take a small section of hair and pull it taut.
Holding the appliance with the other hand,
start at the roots and clamp the hair firmly
between the plates.
• With the plates clamped together, run the
straightener down the entire length of hair,
from roots to ends, without stopping.
• Repeat until the desired amount of
straightening has been achieved.
WARNING: The plates of this professional
straightener will get very hot within a few
seconds. Do not touch the plates or let
them come in contact with the skin once
position.
the straightener has been turned on.
USER MAINTENANCE
INSTRUCTIONS
Make sure the unit is unplugged and
P
cool. Clean the outside of the power
ROTECT&
handle with a slightly damp cloth. Wipe
the plates with damp cloth. No other
PROFESSIONAL STRAIGHTENER
maintenance is required.
with 3X protection
STORAGE
When not in use, unplug the unit. Allow
it to cool, empty tank and store out of
reach of children in a safe, dry location.
Never wrap the cord around the appliance
since this will cause the cord to wear
prematurely and break. Handle cord
carefully, and avoid jerking, twisting or
straining it especially at plug connections.
+
Ceramic
+
Ions
for beautiful, healthy,
shiny hair
®
®
MC
S
HINE
TM
S-3000i

Advertisement

loading

Summary of Contents for Remington Protect & Shine S-3000i

  • Page 1 120-240 VAC 50/60Hz • DO NOT get the unit too close to scalp, face, ears, neck or skin. Remington and Protect & Shine are trademarks of Remington Products Company, L.L.C. is a registered trademark of E. I. du Pont de Nemours •...
  • Page 2 If any of followed, including the following: these things happen, return the appliance to the READ ALL INSTRUCTIONS Remington Customer Service Center for examination and repair. BEFORE USING. 6. Keep the cord away from heated surfaces.

This manual is also suitable for:

C746dtnC746nC746dnC748eC748deC748dte ... Show all