Step 3A: Install Highpoint Raid Management (Webgui) - HighPoint RocketRAID 4520 User Manual

6. Enter super user mode. Type make to build driver, then type make install
to install the driver.
7. Reboot.
For FreeBSD Users:
1. Visit www.highpoint-tech.com> Support > Documents and Downloads >RocketRAID
4500 Series.
2. Download the FreeBSD drivers and copy them onto a USB thumb drive.
3. Mount the USB and extract the drivers, then copy the driver to
/boot/kernel/hptiop.ko.
# tar-zxvf xxx.tgz
# cp hptiop-xxx.ko /boot/kernel/hptiop.ko
4. To set the drivers to automatically load on startup, type the following command.
# echo 'hptiop_load="YES"' >> /boot/defaults/loader.conf
For more information, refer to the FreeBSD Manual at:
http://highpoint-
tech.com/BIOS_Driver/rr4520/FreeBSD/rr4522/Install_FreeBSD_RR3xxx_4xxx.pdf

Step 3A: Install HighPoint RAID Management (WebGUI)

The HighPoint RAID Management (WebGUI) software is a useful tool used to create,
maintain, and view your RAID arrays.
For Windows Users:
1. Download the latest WebGUI from our website at www.highpoint-tech.com>
Support > Documents and Downloads >RocketRAID 4500 Series
2. Extract and open the contents of the downloaded file.
15