How To Install Windows To The Ssd7202/Ssd7105/Ssd7505/ Ssd7502/Ssd7540/Ssd7580A/Ssd7580B Raid Controller; Step 1 - Preparing The Usb Flash Drive; Step 2 - Preparing The Uefi Package; Step 3 - Creating The Raid Array - HighPoint SSD7000 Series Installation Manual

SSD7105&7202&7502&7505&7540&7580A&7580B Boot RAID Windows Installation Guide
How to install Windows to the SSD7202/SSD7105/SSD7505/
SSD7502/SSD7540/SSD7580A/SSD7580B RAID Controller
Note: The following installation process uses the SSD7505 as an example

Step 1 - Preparing the USB Flash Drive

When preparing the USB flash dive, make sure to format the USB partition as FAT32. If another
file system is used, the USB drive may not be properly recognized, and will not appear as an
option under the motherboard's UEFI BIOS menus.

Step 2 - Preparing the UEFI Package

The package must be unzipped directly to the root of the bootable USB flash drive (do not extract
the contents to a new folder). All of the following items must be present in the root of the USB
flash drive:
For example (SSD7505)
Note: If the above content is not present in the root directory, the UEFI boot device will not be
properly recognized, and or you will be unable to create an array for OS installation.

Step 3 - Creating the RAID Array

a. This procedure assumes you have already installed NVMe SSD's into the SSD7000/
SSD7500 series controller (please see Step 1- Prerequisites).
b. Note: Make sure your USB flash drive has been formatted using the FAT32 file systems.
c. Insert the bootable USB flash drive into the motherboard and boot the system.
d. The motherboard's BIOS post screen should display information about the NVMe SSD's:
7