Roof Outlet For Shafts With Promat Profiles; Plastic (Pps) Balanced Flue System For Routing Multiple Pipes Through A Shaft - Viessmann Vitodens 100-W Technical Manual

Design and sizing information for connection on the flue gas side
A
B
C
A PROMATECT® female connection
B PROMATECT® profile
C Flue pipe

Roof outlet for shafts with Promat profiles

A
B
C
A Vertical coaxial roof outlet
B Universal roof tile
C Lightweight shaft made from PROMATECT® mineral fibre pro-
files

2.9 Plastic (PPs) balanced flue system for routing multiple pipes through a shaft

There is an option of routing several flues in room sealed operation
through a common, sufficiently sized shaft. For this, the Vitodens
condensing boilers must be installed in the same living space. For
reasons of fire protection, the installation and connection on different
levels or in different rooms is not possible. The flues and the shaft
covers must be professionally supported inside/on the shaft, on site.
For balanced flue components from the Vitodens to the common
shaft, see page 15.
VITODENS, VITOSOLAR
Promat is one of the companies that sells a shaft system made from
calcium silicate fire-resistant plates approved by the building inspec-
torate [Germany].
Promat address:
Promat GmbH
Postfach 109 564
D-40835 Ratingen
During installation, match the terminal shaft profile to the roof slope.
(cont.)
VIESMANN
2
29