Spa Light; Cleaning Your Spa; Covering Your Spa; Repairs To The Acrylic - Jacuzzi Laser Owner's Manual

MAINTENANCE

Spa Light

Two filters , one blue and one red, are provided with
each spa light. To change the filter, simply snap the
colored filters in place on top of the normal lens. Two
replacement bulbs are also included. Put them in a safe
place for future use. When a bulb burns out, replace it
from the back of the light fitting on the rear surface of the
shell by pulling out the bulb receptacle.
LIGHT BULB REPLACEMENT
LOCKING
NUT
LIGHT BULB
(6 WATT ONLY)
BULB
RECEPTACLE

Cleaning Your Spa

Your spa shell consists of two layers of plastic
materials. Its smooth top surface of acrylic is tough and
durable and contains concentrated color. This is sup-
ported by a substantial thickness of fiberglass-rein-
forced polyester resin. A catalyst causes a chemical
reaction during manufacture that bonds these layers
permanently into a hard, strong material. With a mini-
mum amount of care and cleaning, your whirlpool spa
will look new for years.
To clean your spa, simply use a mild, nonabrasive
liquid detergent, isopropyl alcohol, or commercially pre-
pared spa cleaner. Do not use abrasive cleaners. You
can protect and restore the gloss to a dulled surface by
applying Meguiar's #10 Mirror Glaze, which is a product
specifically designed for use on acrylic finishes. If
Meguiar's is not available, an acrylic polish of equal
quality or automotive paste wax will do.
level of the spa surface. This may be applied to the
acrylic surface with a soft cloth and wiped clean. Use
sparingly in small amounts to avoid contaminating the
spa water. If the water line is heavily soiled, it may be
advisable to lower the water level 2-3 inches before
cleaning; then refill to normal level.

Covering Your Spa

your Jacuzzi Whirlpool Bath dealer. Use of this cover will
NORMAL
help to reduce energy costs by minimizing heat loss and
LENS
evaporation. In addition, the attractive cover is an
COLORED
effective means of preventing debris such as leaves and
FILTER
dirt from entering your spa when not in use. Follow the
instructions for use and care provided with the spa
cover.
CAUTION: The spa cover is not designed to support
any weight. Therefore, as a safety precaution and
to preserve the life of your cover, you must not sit,
stand, or lie on it; nor should you place objects of
any kind on top of it.
NOTE: Jacuzzi Whirlpool Bath does not guarantee
LIGHT
BEZEL or warrant this cover.
manufacturer's information provided with the cover.
SHELL

Repairs to the Acrylic

finish (acrylic) can be removed with 600-grit wet/dry
sandpaper. Restore the glossy finish with Meguiar's #10
Mirror Glaze or comparable automotive paste wax.
acrylic surface will require refinishing. Ask your Jacuzzi
Whirlpool Bath dealer for special instructions.

Headrest Pillows

a clean cloth. Use a vinyl conditioner once a month to
maintain the water resistance and lustrous finish.
easily be removed for cleaning.
treatment is used.
20
Use a spa cleaner for residue buildup at the water
An optional spa cover for your spa is available from
Minor scratches which do not penetrate the color
Major scratches or gouges which penetrate the
Clean the pillows regularly with soap and water and
Pillows are held in place by snap-in fittings and can
For all units, remove the pillows if chlorine shock
Refer to spa cover