Kenwood R-5000 User Handbook Manual page 27

UP
VOICE RECALL
EXAMPLE - If you enter the command ST1; and the receiver is
in AM mode, the step frequency will change from 1 kHz to 100
Hz.
UP;
UP - If the receiver is in VFO mode, moves the current VFO up in
frequency according to step switch. Refer to the R-5000 manual
for the step sizes for each mode. If in memory channel mode,
moves the receiver down one channel.
EXAMPLE - If you enter the command UP; the frequency is
increased 1 kHz if the receiver is in AM mode, either VFO A or
VFO B is selected, and the step switch is off.
VR;
VR0; = VOICE RECALL OFF
VR1; = VOICE RECALL ON
VOICE RECALL - Enables or disables the voice synthesizer
generator function of the receiver. This command will not work
unless the Voice Synthesis option is installed.
EXAMPLE - If you enter the command VR1; the receiver will
announce the operating frequency by voice synthesis.
25