Table of Contents
Advertisement
< When EXTERNAL IN is selected, the SURROUND buttons (
) and the AUTO/MANUAL button do not work.
If a digital device is connected to DIGITAL IN terminals,
select the desired decoding mode by pressing the
AUTO/MANUAL button.
Each time the AUTO/MANUAL button is pressed, the
decoding mode is changed as follows:
AUTO (default):
The appropriate decoding mode is selected automatically.
Usually, select this.
MANUAL:
Select the desired surround mode by pressing the
SURROUND button (
or
20
Surround Mode
).
/
Each time the SURROUND button (
the surround mode changes.
A
When Dolby Digital signals are input and AUTO is selected,
the surround mode is set to DOLBY DIGITAL automatically. If
you press the SURROUND button (
one of the following surround modes:
When the source is Dolby Digital 5.1-channel:
DOLBY DIGITAL
When the source is Dolby Digital 2-channel:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC
B
When DTS signals are input and AUTO is selected, the
surround mode is set to DTS automatically. The SURROUND
buttons do not work.
C
When the source is PCM (2-channel stereo), or when analog
stereo signals are input, you can select one of the following
surround modes:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC, MATRIX, CHURCH, THEATER, HALL,
STADIUM
< When the SURROUND button (
current surround mode is displayed. Press the SURROUND
button (
or
) repeatedly to select any other surround
mode.
< When you press the SURROUND button (
sound is cut off for a moment.
< DOLBY DIGITAL can be selected only during playback of a
DVD disc recorded in DOLBY DIGITAL format.
< Press the STEREO button to cancel the surround mode.
< If the SPEAKER ON/OFF button is turned to OFF, the
SURROUND buttons will not work.
or
) is pressed,
or
), you can select
or
) is pressed once, the
or
), the
Hide quick links:
Advertisement
Table of Contents
