16
Parameter value as a boolean input
How the block handles the input
• The block reads the selected value as an integer.
• The block uses the bit defined by the bit field as the boolean input.
Bit value 1 is boolean value true and 0 is boolean value false.
Example: The figure below shows the value of input I1 selection parameter when
the input is connected to a bit indicating the status of digital input DI2. (In ACS800
Standard Application Program, the digital input states are internally stored as actual
signal 1.17 DI6-1 STATUS. Bit 1 corresponds to DI2, bit 0 to DI1.)
How to select the input
See the section
Note: The parameter selected as an input should have a packed boolean value
(binary data word). See the Firmware Manual.
Function blocks
Display of the panel
Inversion field
Group field
Index field
Bit field
Parameter value as an integer input
1 L ->
0 rpm
84 ADAPTIVE PROGRAM
06 INPUT1
[±001.017.01]
0
above.