Securing The Drive; Mounting Location - Raymarine M81130 Installation Manual

12

Securing the drive

Mounting location

Before you secure the drive to your boat, you must first check the suitability of the mounting
location.
Mounting location
Consult the boat manufacturer if you have any doubt about the strength or
suitability of the mounting location.
• Structural strength:
• This drive produces a considerable amount of force, so you must mount it on a solid
structure (i.e. a substantial frame member) in the boat. In some cases you may need to
build a special frame to mount the drive unit.
• To prevent excess noise and vibration, do not attach this drive to any structures that
support cabins.
• Drive orientation:
• You can attach the drive unit mounting foot to any suitable horizontal or vertical sur-
face. If required, you can also mount the drive unit upside down.
• General position:
• Refer to the EMC installation guidelines (
• Make sure the drive will be accessible for future servicing.
• Environment:
• This drive is not waterproof, so you should mount it in a dry location, clear of any bilge
water.
Figure 5: Alignment between push rod and tiller arm plane of rotation
CAUTION
5º Max.
5º Max.
page 9
)
D5078-1